Archivio Domande

How to update MAG via USB?

Some of the MAG devices lose the portal settings after updating the device to the latest version of system software and this will not allow the clients to add any portal addresses to the device.

In this method, we will teach you how to downgrade the system software to the latest version via a USB drive.

How to update

In order to update STB from System settings via a USB:

Step 1: Make sure that your USB drive matches the requirements.

Step 2: Download the required SW image file (imageupdate).
Note. Latest version of Factory SW image is accessible on manufacturer's server: http://update.infomir.com/mag/<model>/imageupdate (<model> - number of STB model). For example, for MAG322: http://update.infomir.com/mag/322/imageupdate

Step 3: Create directory mag<model> in the root of the USB drive and write "imageupdate" file to this directoryFor instance, for the MAG322 directory name: mag322.

0479-howtoupdate-mag-via-usb1

Step 4: Connect prepared USB-drive to STB. You can use any USB connector of STB: both rear or front.

Step 5: Open Settings⇒ System settings ⇒ Software update.

Step 6: In Software update window set Update method = USB. You can see two new strings:

 

  • Disk - name of USB-drive;
  • Path - Path to update file on the USB-drive.

0699-howtoupdate-mag-via-usb2

Step 7: Select Verify (OK) to make sure that STB can detect "imageupdate" file.

Step 8: If the file is detected and readable successfully you'll see Software Update window.

0854-howtoupdate-mag-via-usb3

Step 9: In the Software Update window displays descriptions of the firmware versions: the Current version (operating in STB) and New version (available on a USB drive).

Step 10: Select subsequent operation after comparing Current and New versions:

  • To reject update push Exit.
  • To start update push Update (F1).

Step 11: The status of the software update is displayed by the progress bar and comments. To view the log of update user may push Show log (Info on RC).

0462-howtoupdate-mag-via-usb4

Step 12: Wait until the update process is complete. After completing the update, the STB automatically reboots.
Note. Do not turn off STB and plug off USB drive until the end of the update.

 

  •  
  • #MAG
  • 0 Utenti hanno trovato utile questa risposta
Hai trovato utile questa risposta?

Articoli Correlati

How can I change the portal address in the MAG box?

Sometimes you may require changing your portal address to another IPTVprovider and the steps...

How to setup IPTV on a MAG device?

In this tutorial, we are going to show you how to bring IPTV channels to your MAG device. An...

{FIX} BLOCKED FOR COPYRIGHT REASONS WARNING

Infomir the manufacturer of MAGs is complying with requests by copyright owners to block URLs...

How can I update my MAG device?

Sometimes the best way to fix an issue is to update the MAG box to the latest version of the...

What is a Stalker Portal in MAG ?

A stalker portal is a link between your MAG device and the IPTV feeds which supplies all the...